# Server Racks Cost Too Much - Buy or DIY?

Source: https://www.youtube.com/watch?v=iZ0qmq42RLs
Recap page: https://rapidrecap.app/video/iZ0qmq42RLs
Generated: 2025-11-20T20:04:22.585+00:00

---
## Quick Overview

The DIY approach to building a basic 8U server rack using IKEA Lack side tables, combined with custom-cut 2x4s and rack rails, proved significantly cheaper and structurally sound compared to buying a dedicated rack, costing only about $73 total versus $209 or more for a pre-made unit.

**Key Points:**
- The DIY server rack (Version 3) cost a total of $73, comprising $17 for the IKEA Lack side table, $4 for wood (2x4s), $30 for installation time (estimated), and $20 for the rack rails.
- The initial DIY attempt (V1) using the Lack table alone cost $34, but the wood legs were hollow, leading to structural concerns.
- The final, successful DIY version (V3) replaced the hollow Lack legs with solid wood 2x4s cut to the appropriate height, achieving better rigidity.
- The pre-built Samson 8-space rack on wheels cost $209, demonstrating a significant cost saving with the DIY method.
- The DIY rack successfully held several pieces of heavy audio/server equipment, including a power amp and various rack-mounted processors, without immediate failure.
- The key structural components for the DIY build were the IKEA Lack side table (used as the shelf base) and purchased 19-inch full-hole rack rails.

![Screenshot at 3:35: The DIY V2 structure, built with the IKEA Lack table and solid wood legs, is shown holding several pieces of rack-mounted audio equipment, demonstrating its successful assembly and capacity.](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-03-35.png)

**Context:** The video explores the cost-effectiveness of building a custom server rack for a homelab environment versus purchasing a ready-made rack, framing the challenge around managing and organizing rack-mountable audio/server gear in a living room setting. The hosts test multiple versions of a DIY solution, primarily utilizing the inexpensive IKEA Lack side table as a base structure, comparing it against a commercially available rack.

## Detailed Analysis

The video compares buying a dedicated server rack against building a custom solution using readily available furniture components, primarily the IKEA Lack side table. The initial attempt (DIY V1) used the Lack table's hollow legs, which proved structurally inadequate when tested with equipment, leading to revisions. The hosts realized the hollow legs could not securely hold the rack rails and equipment. They then progressed to DIY V2, replacing the hollow legs with solid 2x4 wood pieces, costing an additional $4. This version, after factoring in $15 of estimated installation time and $2 for screws, totaled $34 and proved significantly more rigid. They further refined this with DIY V3, adding $20 for a pair of proper 19-inch rack rails, bringing the total cost to $73. This final setup successfully housed multiple rack units, including a power amplifier, demonstrating superior cost savings compared to the $209 pre-built Samson rack shown. The hosts concluded that the DIY method, while requiring labor, provided a stable and affordable solution for housing a homelab setup.

### Cost Comparison & Initial Failure

- DIY V1 cost $34 ($17 Lack table + $15 time + $2 screws) but failed due to hollow legs
- Pre-built Samson rack cost $209
- DIY V2 replaced hollow legs with $4 of 2x4 wood, totaling $53 (including labor time).

### DIY V3 Finalization & Cost

- Added $20 for proper 19-inch rack rails, resulting in a $73 total cost
- The resulting structure, using solid wood legs, held rack-mounted equipment securely.

### Conclusion

- The DIY solution saved over $130 compared to the pre-built rack, offering a solid, cost-effective alternative for homelab storage.

![Screenshot at 0:05: The initial problem of disorganized audio gear piled on a table highlights the need for organization.](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-00-05.png)
![Screenshot at 0:33: The Samson 8-space rack, priced at $209, is introduced as the commercial alternative.](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-00-33.png)
![Screenshot at 2:22: The host measures the height of the IKEA Lack table legs to determine the required length for the custom wooden supports.](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-02-22.png)
![Screenshot at 3:35: The hosts assemble the DIY frame using the black rack rails screwed into the custom wooden legs.](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-03-35.png)
![Screenshot at 12:54: The final cost breakdown for DIY V1 is displayed: $34 Total \($17 Lack table + $15 Installing time + $2 Screws\).](https://ss.rapidrecap.app/screens/iZ0qmq42RLs/00-12-54.png)