# How to Upgrade a Plain Mirror: $40 DIY Frame Hack Source: https://www.youtube.com/watch?v=eeE4qoQOurQ Recap page: https://rapidrecap.app/video/eeE4qoQOurQ Generated: 2025-12-02T22:07:24.146+00:00 --- ## Quick Overview The creator successfully frames a large, existing bathroom mirror for under $40 by building a custom wood frame using 1x2 lumber, cutting 45-degree mitered corners, assembling the pieces with wood glue and screws, painting the frame matte black, and adhering it directly to the mirror surface using liquid nails, resulting in a modern, high-end look. **Key Points:** - The DIY mirror framing project utilized inexpensive 1x2 lumber and cost less than $40, significantly undercutting professional replacement costs. - The creator avoided using a tape measure for initial measurements, relying instead on test fitting the wood pieces against the existing mirror and countertop (0:08-0:12). - Cutting the 1x2 lumber pieces required setting a miter saw to a 45-degree angle for all four frame corners (0:54). - The frame pieces were assembled using wood glue and screws, with pilot holes drilled only halfway through to prevent splitting the wood (2:24-2:25). - After assembly and sanding the joints (3:07), the wood frame was spray-painted with two coats of matte black primer and finish (3:13-3:27). - The finished black frame was attached to the existing large mirror using liquid nails, ensuring the frame edges were close to the mirror edges and held in place with blue painter's tape until cured (3:32-3:48). - The final result transforms the bathroom vanity area, replacing the old builder-grade setup with a modern, custom-framed mirror and new black fixtures (4:52-4:54). ![Screenshot at 0:08: The creator holds a 1x2 piece of lumber against the existing bathroom mirror and countertop to visually determine the required length for the frame pieces without using a tape measure.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-00-08.png) **Context:** The video documents a DIY project focused on upgrading a large, frameless mirror above a double-sink vanity in a bathroom undergoing renovation. The creator aims to give the dated bathroom a modern facelift by adding a custom wood frame to the existing mirror, circumventing the high cost of replacing the entire mirror unit. The process involves careful measuring, cutting, assembly, painting, and finally, securing the new frame to the glass. ## Detailed Analysis This video details a cost-effective DIY method for framing a large, existing bathroom mirror, transforming the space for under $40. The process begins by selecting 1x2 lumber, which the creator uses to mock up the frame dimensions directly against the mirror and vanity countertop, intentionally skipping traditional tape measurements (0:08-0:12). The lumber is then cut using a miter saw set to 45 degrees for all four corners (0:54-0:55). The frame pieces are joined using wood glue and screws, with the creator emphasizing the importance of only drilling pilot holes halfway through to prevent splitting the wood during assembly (2:24-2:25). After assembly and light sanding of the mitered joints (3:07), the entire wood frame is spray-painted with two coats of matte black primer and finish outdoors (3:13-3:27). Finally, the finished black frame is attached directly to the existing mirror using liquid nails, a strong adhesive suitable for glass. Blue painter's tape is strategically placed around the frame edges to hold the frame tightly against the mirror while the adhesive cures, which can take up to 24 hours (3:32-3:48, 4:38-4:40). The video concludes by showcasing the final, dramatically modernized bathroom, featuring the new black-framed mirror, new black faucets, and updated cabinetry, demonstrating a significant visual improvement for a minimal investment (4:52-4:54). ### Initial Planning and Materials - Used 1x2 lumber for the frame, costing under $40 - Avoided tape measure for initial fitment by mocking up pieces against the mirror (0:08-0:12) - Selected matte black spray paint for the finish (3:15). ### Frame Construction - Cut all four pieces with 45-degree mitered corners using a miter saw (0:54) - Assembled pieces with wood glue and screws, drilling shallow pilot holes to prevent splitting (2:24-2:25) - Sanded the mitered joints smooth (3:07). ### Finishing and Installation - Applied two coats of matte black paint to the frame, covering the front and back (3:24-3:27) - Installed the frame onto the existing mirror using liquid nails, avoiding construction adhesive meant for wood (3:32-3:34) - Used blue painter's tape to pin the frame securely against the mirror while the adhesive cured (3:45-3:48). ### Project Conclusion - The final result shows a successful, modern upgrade to the bathroom mirror and vanity area, contrasting sharply with the 'before' state (4:52-4:54) - The creator teased future videos covering the installation of the partition wall (5:03-5:07). ![Screenshot at 0:04: A close-up of the creator applying primer to the inside of the exposed wooden vanity cabinet using a small paint roller.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-00-04.png) ![Screenshot at 0:33: The bathroom vanity area with the large mirror showing the unpainted wooden cabinet base and the exposed plumbing holes.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-00-33.png) ![Screenshot at 0:51: The creator using a Milwaukee M18 FUEL miter saw to cut a piece of 1x2 lumber at a 45-degree angle for the mirror frame.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-00-51.png) ![Screenshot at 1:33: The creator uses blue painter's tape to temporarily hold the first raw wood frame piece against the mirror while marking cuts.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-01-33.png) ![Screenshot at 4:54: The finished bathroom vanity featuring the large, sleek black-framed mirror, new black faucets, and updated cabinetry/lighting.](https://ss.rapidrecap.app/screens/eeE4qoQOurQ/00-04-54.png)