# 🍍📟 Unboxing and Setup - WiFi Pineapple Pager Source: https://www.youtube.com/watch?v=SLFq-R6UGX0 Recap page: https://rapidrecap.app/video/SLFq-R6UGX0 Generated: 2025-12-19T18:09:38.299+00:00 --- ## Quick Overview The video provides a complete unboxing and initial setup guide for the Hack 5 WiFi Pineapple Pager, detailing charging, firmware download/flashing via a web browser interface at 172.16.52.1, and physical attachment of the belt clip. **Key Points:** - The initial setup process involves fully charging the Pager via USB-C until the power LED changes from red to green (0:09, 1:31). - Users must download the latest firmware (.bin file) from the official downloads page: https://downloads.hak5.org (4:32). - After charging, connect the Pager to a computer using the USB-C cable; the computer detects it as a USB Ethernet adapter (1:01, 4:53). - Access the setup page by navigating a web browser to the static private IP address: http://172.16.52.1 (5:42). - On the setup page, click 'SELECT FIRMWARE,' select the downloaded firmware file, and then click 'UPLOAD' followed by 'INSTALL' (5:57, 6:10). - The firmware flashing process takes approximately 15 minutes, during which the device screen shows 'FLASHING' and users must not disconnect power (6:13). - The device includes a removable clip on the back for attachment, which slides into a receiver until it clicks (2:33, 4:05). ![Screenshot at 0:01: Host introduces the WiFi Pineapple Pager and prepares to unbox the device, holding the yellow and black packaging.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-00-01.png) **Context:** This video tutorial from Hack 5 guides users through the initial steps required to get the WiFi Pineapple Pager operational. The Pager is a small, portable device designed for network auditing and analysis, requiring a firmware update out of the box to function correctly. The process is demonstrated using a laptop connected to the Pager via USB-C, which provides both power and a network bridge for configuration. ## Detailed Analysis The video details the unboxing and initial setup of the Hack 5 WiFi Pineapple Pager. The first critical step is to fully charge the device using a USB-C cable connected to a smartphone or laptop charger; charging is complete when the power indicator LED turns from red to green (0:09, 1:31). Next, users must download the latest firmware, which is a .bin file, from the official Hack 5 downloads page: https://downloads.hak5.org (4:32). Once charged, connect the Pager to a computer using the USB-C cable; the computer will recognize it as a USB Ethernet adapter and automatically assign an IP address (1:01, 4:53). Users then navigate to the web-based setup interface by typing the static IP address http://172.16.52.1 into a browser (5:42). On the setup page, the user selects the downloaded firmware file and initiates the upload, followed by clicking 'INSTALL' (5:57, 6:10). The firmware installation, or flashing, takes about 15 minutes, and the device screen explicitly warns users not to disconnect power or close the browser during this time (6:13). Finally, the video shows how to attach the included belt clip by sliding it into the receiver on the back of the yellow device until it clicks (2:33, 4:05). The presenter also mentions that the device may get hot during prolonged use, and the built-in thermal protection might shut it down if necessary (3:06). ### Unboxing and Initial Power - Host unboxes the WiFi Pineapple Pager (0:01) and notes that the first step is to charge it fully until the power LED turns green (0:09, 1:31). ### Firmware Preparation - Users must download the latest firmware (.bin file) from downloads.hak5.org (4:32) and ensure the device has breathing room as it can get hot during use (2:59). ### Connecting to PC - Connect the Pager to the computer via USB-C; the computer detects it as a USB Ethernet adapter (1:01, 4:53). ### Web Setup Access - Access the setup utility by navigating to the private IP address http://172.16.52.1 (5:42). ### Flashing Firmware - Select the downloaded firmware file, upload it via the web interface (6:06), and click 'INSTALL'; this flashing process takes about 15 minutes and must not be interrupted (6:13). ### Physical Assembly - Attach the included belt clip by sliding it onto the receiver on the back of the yellow Pager until it clicks (2:33, 4:05). ![Screenshot at 0:01: Host holding the yellow and black packaging for the WiFi Pineapple Pager, introducing the unboxing.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-00-01.png) ![Screenshot at 0:38: Host displaying the included power delivery brick and the USB-C to A/C cable used for charging.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-00-38.png) ![Screenshot at 1:12: Close-up view of the host plugging the USB-C cable into the Pager and another end into a power strip's USB port.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-01-12.png) ![Screenshot at 3:36: Close-up of the host pressing the 'B' \(Back\) button on the Pager's D-pad, which is marked red for shutdown.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-03-36.png) ![Screenshot at 5:57: The web interface showing the 'WiFi Pineapple Pager' screen prompting the user to 'SELECT FIRMWARE'.](https://ss.rapidrecap.app/screens/SLFq-R6UGX0/00-05-57.png)