# Woodworking Colored Pencil Stand

Source: https://www.youtube.com/watch?v=6xy6_ki_oIc
Recap page: https://rapidrecap.app/video/6xy6_ki_oIc
Generated: 2026-01-05T22:03:34.35+00:00

---
## Quick Overview

The video demonstrates a complete DIY tutorial for constructing a tiered, rotating wooden colored pencil stand using a miter saw, lathe, table saw, and wood glue, resulting in a functional three-level storage tower for stationery.

**Key Points:**
- The project begins by cutting wooden pieces to specific angles using a miter saw (0:00), including four square/rectangular blocks and several smaller support pieces.
- A central wooden dowel is shaped and smoothed on a wood lathe to form the main vertical support column (0:03-0:06).
- The rectangular blocks are modified by routing or cutting a groove into them to create storage slots for the pencils (0:07-0:09).
- The wood pieces are assembled onto the central dowel, creating three tiers that rotate around the central column (0:07, 0:50, 6:17).
- Wood glue is applied to the joints between the side pieces and the central dowel, and then a fast-acting accelerator spray is used to cure the glue quickly (2:04-3:07).
- The base block is drilled using a Forstner bit or similar hole saw attachment on a drill press/hand drill to secure the bottom of the central dowel (4:51-5:36).
- The final assembled stand features three levels capable of holding colored pencils, demonstrated by loading pencils into the top, middle, and bottom compartments (6:37-7:04).

![Screenshot at 0:00: A close-up shot shows the craftsman setting up the material on a miter saw, highlighting the initial step of precisely cutting the wooden components using a saw blade with a visible laser guide.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-00-00.jpg)

**Context:** This video is a woodworking tutorial demonstrating how to build a custom, multi-tiered, rotating colored pencil storage stand entirely from wood. The craftsman utilizes various common workshop tools, including a miter saw for precise angle cuts, a wood lathe for shaping the central support rod, and a drill for creating the base mounting hole. The construction emphasizes joinery achieved primarily through wood glue and an accelerator spray for rapid curing.

## Detailed Analysis

The video provides a step-by-step guide for creating a three-tiered, rotating wooden pencil holder. The process starts with preparing the main structural components. First, the craftsman uses a miter saw (0:00) to cut several wooden blocks—which will form the tiers—ensuring specific, likely angled, cuts for a decorative or functional edge. Next, a long wooden dowel is prepared on a wood lathe, where it is turned down and smoothed into a uniform cylindrical shape to serve as the central axis (0:03). Simultaneously, the square wooden blocks designated for the tiers are modified; grooves are cut into them, likely using a table saw or router setup guided by a combination square (0:09-0:26), to form the open slots where the pencils will rest. After all pieces are cut, assembly begins. The craftsman glues the side pieces onto the central dowel, alternating the orientation of the tiers to create a staggered, twisting look (0:07, 2:04). Fast-acting super glue and an accelerator spray are used to secure these connections rapidly (2:04-3:07). The base piece is prepared by drilling a precise hole using a large bit on a power drill to accept the bottom of the central dowel (4:51). Finally, the components are stacked onto the central rod, forming the three-level structure. The completed stand is shown holding various colored pencils in each tier (6:37), confirming its function as a rotating stationery organizer.

### Material Preparation & Cutting

- Using a miter saw to cut wood for the tiers (0:00)
- Measuring angles precisely with a combination square and pencil (0:09)
- Shaping the central dowel on a wood lathe (0:03)

### Tier Modification

- Cutting grooves into the wooden blocks to create pencil slots using a table saw and fence setup (0:26)
- Drilling a precise hole in the base block using a specialized drill bit (4:51)

### Assembly and Gluing

- Applying wood glue to the contact surfaces between the tier blocks and the central dowel (2:04)
- Using an aerosol accelerator spray to instantly cure the glue for quick assembly (2:55)

### Final Assembly and Functionality Test

- Stacking the three assembled tiers onto the central dowel (5:38)
- Demonstrating the final product holding colored pencils in all three tiers (6:37)
- Showing the completed, multi-level, rotating pencil stand (6:54)

![Screenshot at 0:00: Initial cutting of wood pieces using a miter saw, showing the blade and angle settings.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-00-00.jpg)
![Screenshot at 0:03: A wooden rod being turned and shaped on a wood lathe while the craftsman observes.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-00-03.jpg)
![Screenshot at 0:10: Marking precise angles on a piece of lumber using a combination square and red pencil.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-00-10.jpg)
![Screenshot at 2:04: Applying white wood glue from a squeeze bottle to the edges of the cut wooden blocks before assembly.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-02-04.jpg)
![Screenshot at 6:54: The finished, three-tiered wooden pencil stand resting on a wooden surface against a brick background, fully loaded with colored pencils.](https://ss.rapidrecap.app/screens/6xy6_ki_oIc/00-06-54.jpg)